Q: What is the range of the Cordless 2.4GHz Presenter?
A: The range is up to 50 feet (or 15 Meters).
Q: How long should the two AAA batteries last under normal use?
A: On average, the batteries should last about six months. To conserve battery life, be sure to turn it off when you are not using it.
Q: How do I connect/sync the Cordless 2.4GHz Presenter with the mini reciever?
A: Click here to download the LogiBind connect utility. Once you've downloaded it, double click on it to extract the files. Find the LogiBind folder and double click on it. Refer to the README file for instructions on using the LogiBind utility. Note: The utility for the Cordless 2.4GHz Presenter is the LogiBindP.exe file.
Q: How do I know the status of my batteries?
A: When you turn on the device, the LCD screen will display the battery level indicator. A black battery image means the battery level is good. An empty battery image with a line through it means the battery is low. An empty battery with a line flashing through it means the battery level is critical and you should change the batteries soon.
Q: Does the Cordless 2.4GHz Presenter ship with software?
A: No, the Cordless 2.4GHz Presenter does not require any software; it should function correctly using the USB drivers provided by your operating system (Windows XP, 2000, ME, or 98). Just plug it in and go.
Q: Where is the mini-receiver; I can’t find it?
A: One of the features of the Cordless 2.4GHz Presenter is the storable receiver. Turn over the Presenter and look at the top; you should see the top of the mini-receiver. Use your thumb to slide it out from the Presenter.
Q: What system ports does the mini receiver support?
A: You can only use the Cordless 2.4 GHz Presenter on a USB port connection.
Q: My Cordless 2.4GHz Presenter is not working or is not detected by the system; what should I do?
A: First, verify that you are using fresh batteries. Next, make sure you have installed the batteries correctly. After you have checked batteries, make sure you are connecting the mini-receiver directly to the system's USB port as connecting the mini-receiver to a USB hub, switch box, port replicator, or extension cable may cause detection issues. You may also want to try a second USB port as well.
Q: What presentation software does the Cordless 2.4GHz Presenter support?
A: Currently, the Presenter only supports Microsoft PowerPoint. Since nearly all business presenters use PowerPoint on Windows PCs, we are focusing on the largest presentation market.
Q: Does the Cordless 2.4GHz Presenter allow you to move the mouse pointer on the screen?
A: No, it only functions within Microsoft PowerPoint.
Q: Can I launch Microsoft PowerPoint using the Cordless 2.4GHz Presenter?
A: No, you must launch Microsoft PowerPoint using your system's pointing device (mouse), and load the presentation you wish to run. Then you can use the Presenter.
Q: How do I start my presentation using the Cordless 2.4GHz Presenter?
A: Once you have launched Microsoft PowerPoint and loaded your presentation, you may start your presentation by pressing the (F5/esc) button located on the top-left-front of the Presenter. Press this button again to escape your presentation. This will only escape from your current presentation; it will not close Microsoft PowerPoint.
Q: How do I go forward and backward through my presentation?
A: To move forward, press the > button on the top front of the Presenter. To move back, press the < button on the left.
Q: How do I blank the screen temporarily?
A: You may blank the screen by pressing the button right next to the (F5/esc) button. This button looks like a black monitor. Press it again to return to your current presentation screen.
Q: How do I use the laser pointer?
A: To use the laser pointer, first verify that you have the Presenter on. Next, press and hold the button with the bright red dot to point with the laser, and release to turn it off.
Q: How do you set the timer?
A: To launch the timer, simply press the Timer button on the right side of the device. To add time in five-minute increments, keep clicking until you get right amount of time for your presentation. When the LCD stops flashing, the count down begins. To reset the timer at any time, press and hold the Timer button for two seconds. You may add time to the counter if you wish by just pressing the Timer button again. When five minutes are remaining, the LCD Timer will flash for five seconds and then the Presenter will vibrate briefly. The same warning will occur when there are two minutes remaining. When time runs out, the Presenter will vibrate twice, flash 0:00 for five seconds and then the LCD will go blank.
Q: How do I change the volume of the sound in my presentation?
A: Press the Volume button on the left side of the Presenter. Pressing the + will increase volume and pressing the – will lower the volume.
Q: Can you turn the vibration feedback off?
A: To keep the design of the product simple and easy to use, we’ve minimized the number of controls and programmable features are on the device. Therefore, you cannot turn off the vibration feedback or program it for other time intervals.
Q: Do you need to use the timer to conduct a presentation?
A: No, using the timer is optional.
Q: Will this work with the Mac?
A: Although not supported when the Presenter was originally launched, users have reported that it will work on the Mac OS with Microsoft PowerPoint.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section
There are no Downloads for this Product
There are no Downloads for this Version
Compatible Product
