Adding an additional device to an Activity for your Harmony Remote

The Logitech Harmony Remote Software automatically combines the devices it believes are required in an Activity. Occasionally, an additional device may be required in an Activity that wasn't included in the initial setup. Adding a Device to an Activity as an additional command allows you to map commands for that device to the remote while in the Activity, saving you from entering Device mode every time you want to control it.

For example, for a DVD Activity, the Television, AV Receiver and DVD player are included, but you also have an A/V switch which needs to be set to a specific input to get a picture on the Television. In this case, you would add the A/V switch to the Activity as an additional device.

To add an additional Device to an Activity:

1. Launch the Logitech Harmony Remote software and login to your account
2. Click on the Activities tab on your home page
3. Click on Settings for the Activity you wish to add additional devices to
4. Select Review the settings for this Activity and click on the Next button
   

   

5. Select Yes, but I want to add more control of options and devices for this Activity and click on the Next button
   

   

6. Click Add to select any additional devices that you want to use in the Activity
   

   

7. The device should now appear under the "Devices In Use" section. Click Save to continue setting up the activity

   

8. Confirm the settings for your Activity. Click Next to continue through the wizard. You will be asked to select an input for the Additional device. If you do not need that device to be set to a specific input, you can select "I don't need to select the input for my..." and click Next to continue
   

   

9. On the Custom Actions page, click Save to proceed to the next page. For more information on adding a custom action to the start or end of an Activity, please see 360023209554 - Adding commands to be sent at the start or end of an Activity for a Harmony Remote
10. On the "Review the settings for this Activity" page, select Yes, these settings are correct and click Next
    

    

11. Continue through the wizard by clicking on the Done button to return to the Home page
12. Click on the Update Remote button to update your remote