Error when connecting a Logitech Revue to a wireless network after the Android 3.1 update

If you receive an error when attempting to connect your Logitech Revue to your wireless network after the Android 3.1 update, please follow these steps:

1. Determine the Default Gateway address of your wireless network router:

   For a Windows (XP/Vista/7) PC connected to your wireless network:

   1. Click Start.

   2. Type Run in the search box, and click on the Run program when it appears.

   3. Type cmd and press OK.

   4. Type ipconfig and press Enter.

   5. Record the Default Gateway address from the output for use in the following steps.

   For a Mac running OS X (10.4 or later) connected to your wireless network

   1. Navigate to /Applications/Utilities and launch the System Profiler application (this application is named System Information in OS X 10.7)

   2. Click Network in the left pane of the window.

   3. Record the address labeled “router” for use in the following steps.

2. In the Logitech Revue, navigate to All Apps > Settings > Network > IP Settings.

3. Select Static from the list and press the OK key on the Keyboard Controller.

4. Manually enter the Default Gateway address provided by your wireless network router in the Gateway field.

5. Manually enter an IP address matching the first three octets (the first three numbers, counting from left-to-right) of the wireless network router’s Default Gateway address. For the last octet of the IP address (the four number from the left), enter a number 20 units greater than that of the fourth octet of the Default Gateway. (For example; if the Default Gateway is 192.168.1.1 the IP address to enter should be 192.168.1.21.)

6. Manually enter the following information in the Network Prefix length field:

   24, 8.8.8.8, 8.8.4.4

7. Select Connect and press OK.