To configure Windows Live Onecare to allow WiLife, please do the following:
- Manually enable the UPD Universal Plug and Play to allow WiLife video to stream.
- Open the Onecare window.
- Click on View or change settings. (left hand side).
- Click on Firewall tab.
- Click on Advanced Settings.
- Click on Port and Protocols tab.
- Put a check next to Universal Plug and Play - Xbox 360 (UDP 1900)
- Click on Apply.
- Open WiLife software.
If Cameras are still not found, go to Setup>Advanced>Find my cameras. Your WiLife cameras should now work with Windows Live Onecare.
Important Notice: The Firmware Update Tool is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Preference Manager is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Control Center is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Logitech Connection Utility is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The Unifying Software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Important Notice: The SetPoint software is no longer supported or maintained by Logitech. We highly recommend using Logi Options+ for your supported Logitech devices. We are here to assist you during this transition.
Frequently Asked Questions
There are no products available for this section